Reflex M



Produsent: Graham Slee / GSP Audio

Pris: 7590 - 9750 med PSU 1 power supply


Beskrivelse

  • Suitable for moving magnet, moving iron and high-output moving coil cartridges
  • Recommended sensitivity range 1.5 to 10mV
  • Fast-Active preamp and equalisation technology
  • Inherent reduced vinyl click and pop characteristic
  • Rock steady sound stage
  • Truly 3D performance
  • Convert to low-output moving coil by adding an Elevator EXP


I had on hand an older Graham Slee phono preamp, the Era Gold Mk.V - when I'd first listened to it, in January 2004, its highly accomplished sound took me by surprise. After re-familiarizing myself with the Era Gold's sound, I listened to the Reflex M and was surprised all over again...It was fast, clean, three-dimensionally solid, way more transparent...and made for mighty inviting listening - even through the Prince of Price No Limit's megabuck system
Michael Fremer, Analogue Corner, Stereophile June 2012

My Reflex M has changed from good when new to outstanding and spectacular in every way after 3 weeks... Another thought, do not upgrade your cartridge without hearing what a Reflex M can do, it will make your existing cartridge sound as good as it possibly can.
- forum member: Button (Rafi Akbar), London

I can say that my Reflex M is probably the best hifi purchase I've made
- forum member: suede (Johan), London

Just out of interest I did try out a couple of valve phono stages a few years ago, one of which was the Icon PS3 & the Reflex M was preferred
- forum member: RichW (Richard Wood), UK

And today My Reflex M finely arrived. Whooo that is good 5 hours we listen to it. Sorry for my bad spelling.
- forum member: Keffe (Leif Ekstroem), Sweden



Spesifikasjoner

 

Item Measurement
Input and output connectors RCA/phono sockets, hard gold plated
Input sensitivity range 1.5mV to 10mV
Output range (for above inputs) 168mV to 1120mV
Maximum input 46mV rms
Maximum output 5.2V rms
Gain 41dB (112) at 1kHz
Input impedance 47k Ohms plus 100pF
Output impedance (driving impedance) 1k Ohm (will drive 10k Ohms and above)
Noise at output -68dB Quasi-peak 20Hz to 20kHz
Distortion typically 0.01%
RIAA accuracy < 0.3dB
Frequency response 20Hz - 100kHz ("flat", corrected to RIAA)
Channel balance 0.2dB
Channel separation 60dB
Power supply remotely powered using option of energy saving switched mode or PSU1 linear power supply
Size (approx.) W: 107 x H: 50 x D: 180 (mm) inc. jacks

Specifications subject to alteration without notice in keeping with our continuous improvement policy.